Home > News > Content

Product Categories

Contact Information

  • Dongguan Meidele Metal Detector Factory
  • ADD: Dongcheng District, Guangming Village, Wanhang Technolog Park, Dongguan City of Guangdong Province, China.
  • TEL: +86-769-23165658
  • FAX: +86-769-23165648
  • E-MAIL: aronwang@meidele.cn
  • What Should I Do If The Checkweigher Cannot Be Weighed?
    Oct 09, 2018

    During the long-term operation of the checkweigher, various abnormal conditions may occur. If the checkweigher cannot be weighed, what should I do? At this time, check the weighing tray (that is, the middle section of the checkweigher), check whether the gasket of the device sensor is installed, and the installation position! The following are the self-test steps:

    1. Unpack the weighing tray

    2. Twist the sensor's protective screw

    3. Check if the gasket is installed.

    4. Check if the gasket has the corresponding hole on the top.

    5. After the gasket is installed, restore the pallet. If the weighing is not normal, return to the operation interface and reset the technical parameters.

    If the parameter is set, it can still be weighed. You need to call the checkweigher supplier and the engineer will guide the installation.